HTZ Series
HTZ 80
- European Standard Z-axis lifting special type
Max Permissible Forces And Torques
| Type | 80 | |
|---|---|---|
| F(y) | (N) | 8370 |
| F(z) | ||
| M(x) | (N·m) | 140 |
| M(y) | 400 | |
| M(z) | ||
All Forces and torques relate to the following:
Basic Specification
| HTZ | 80 | |||
|---|---|---|---|---|
| Technical Parameters |
Repetitive Accuracy | (mm) | ±0.05 | |
| Pulley Lead | 210 | |||
| Belt Type | 5M-50 | |||
| Maximum Speed | (mm/s) | 2000 | ||
| Maximum Payload※ Note | Vertical | (kg) | 30 | |
| Max. No-load Driving Torque | (N·m) | 0.9 | ||
| Max. Driving Torque | 49.8 | |||
| Basic Specification |
Stroke | (mm) | 1-1500 | |
| AC Servo Motor Output | (W) | 400 / 750 | ||
| Linear Guide | 15#×2PCS | |||
| Max. Outline of Main Engine's Cross Section | (mm) | 94×190 | ||
| Home Sensor | PM-Y45(NPN) | |||
※ Note : Date changes relevently according to different torque and acclerated speed. Please refer to the LIMON calculates software.
Model Number
HTZ 80 - 500 - DB_ - D01 - GB2 - 22 - P3 - A001
| Item No. |
|---|
| 80 |
| Stroke |
|---|
| 100-1500, Gap100 |
| Auxiliary Block |
|---|
| DB_: |
| Motor Mounting Position |
|---|
| D01 |
| Special Order No. |
|---|
| Photoelectric Sensor |
|---|
| P1: 1PC P2: 2PCS P3: 3PCS No Mark: No Sensor |
| Hole Dimension of Coupling ※ Note |
|---|
| Motor Type |
|---|
| GB2, GB3 |
※ Note : Hole dimension of coupling (reducer side)
Motor Mounting Position Version
- D01
Dimensions
HTZ 80
| Stroke (mm) | 100 | 200 | 300 | 400 | 500 | 600 | 700 | 800 | 900 | 1000 | 1100 | 1200 | 1300 | 1400 | 1500 |
| L | 449 | 549 | 649 | 749 | 849 | 949 | 1049 | 1149 | 1249 | 1349 | 1449 | 1549 | 1649 | 1749 | 1849 |
| Weight(kg) | 14.6 | 15.4 | 16.2 | 17 | 17.8 | 18.6 | 19.4 | 20.2 | 21 | 21.8 | 22.6 | 23.4 | 24.2 | 25 | 25.8 |
Dimentional Drawing of Motor Base
※ Note1 : This is optional accessory, please remark if needed
I-80-GB2
I-80-GB3
| 목록보기 |