Ophthalmic lifting column

Z721 LC

• Rated voltage(AC): 100 - 240V
• Initial size(mm): 450 ~ 600mm
• Travel range S(mm): 200 ~ 300mm
• Velocity: 10 ~ 15mm/s
• Load: 1500 N
• Noise: ≤ 55dB
• Duty cycle(%):Work for 2 minutes, rest for 18 minutes(10%)
• Working temperature(℃): 0 ~ +40
• Storage temperature(℃): -20 ~ +50
• Height(m): ≤ 2500
• Relative humidity(%):Monthly average maximum relative humidity is not greater than 85%(the monthly average minimum temperature is 25℃)
• Exteranl tube size1: 165×135 / 151×121
• Exteranl tube size2: 133×133 / 116×116
• Exteranl tube size3: 127×93 / 112×78
• Exteranl tube size4: 125×104 / 117×96

Efficient lifting column

ZT 31LC

• Application: Surgical bed / Gynecological examination bed / Delivery bed
• Force, max: 8000N / 6000 / 4000
• Speed(mm/s): 15/ 25 / 30
• Offset load @ 1m: 3000Nm
• Stroke: 500mm
• Retracted length: DA:R = S/2 + 200mm
• Duty cycle: 2 min ON / 8 min OFF
• Voltage: 24 V DC
• Ambient temperature: -10 ~ 40℃
• Current: 8A
• Dimensions: 163×163mm / 179×149mm

Efficient lifting column

ZT 31LC

• Application: Dissolution apparatus / Hospital bed
• Force, max: 2000N
• Speed(mm/s): 15
• Offset load @ 1m: 500Nm
• Stroke: 400mm
• Retracted length: DA:R = S/2 + 150mm
• Duty cycle: 2 min ON / 8 min OFF
• Voltage: 24 V DC
• Ambient temperature: -10 ~ 40℃
• Current: 6A
• Dimensions: 165×135mm

ZS21LC

• Maximum push: 2000N
• Maximum pull: 1000N
• Static bending load: 2000N.m
• Dynamic bending load: 1000N.m
• Suggested speed for stacking robots: 80mm/s
• Maximum no-load speed: 300mm/s
• Duty cycle: 100%
• Screw type: Ball screw
• Stroke: 0 - 1000mm
• Minimum installation size: S + 200mm
• Repeat positioning accuracy: ≤ 0.5mm

ZS31LC

• Maximum push: 2000N
• Maximum pull: 1000N
• Static bending load: 2000N.m
• Dynamic bending load: 1000N.m
• Suggested speed for stacking robots: 120mm/s
• Maximum no-load speed: 600mm/s
• Duty cycle: 100%
• Screw type: Ball screw
• Stroke: 0 - 2000mm
• Minimum installation size: S/2 + 200mm
• Repeat positioning accuracy: ≤ 0.5mm

ZS41LC

• Maximum push: 2000N
• Maximum pull: 1000N
• Static bending load: 2000N.m
• Dynamic bending load: 1000N.m
• Suggested speed for stacking robots: 160mm/s
• Maximum no-load speed: 900mm/s
• Duty cycle: 100%
• Screw type: Ball screw
• Stroke: 2 - 3000mm
• Minimum installation size: S/3 + 220mm
• Repeat positioning accuracy: ≤ 0.5mm