Ball Screw Stepper Motor - NEMA 17 (42mm)
NEMA 17 (42mm)
- Hybrid Ball Screw Stepper Motor
Short Description :
Nema 17 (42mm) hybrid stepper motor,
bipolar, 4-lead, ball screw, low noise, long life,
high performance, CE and RoHS certified.
Ball Screw Stepper Motor Naming Rules
P
①
①
-
42
②
②
-
I
③
③
-
E
④
④
-
2
⑤
⑤
-
34
⑥
⑥
-
BS0802
⑦
⑦
-
1.5
⑧
⑧
-
4
⑨
⑨
-
100
⑩
⑩
-
B
⑪
⑪
-
XXX
⑫
⑫
Part Number Identification
| ① Profix | P : Zero position sensor or Origin position switch / T : High temperature motor |
| ② Motor Size | Normal Size : 42mm(NEMA 17) |
| ③ Intelligence Configuration | I : Encoder(Closed loop) / ID : Controller and driver(Integrated drive control) |
| ④ Motor Type | E : External / N : Non-captive / NC : Captive / EC : Electrical Cylinder |
| ⑤ Step Angle | 2 : 2 Phase with 1.8° / 4 : 2 Phase with 0.9° |
| ⑥ Motor Length | 34 : 34mm with motor body |
| ⑦ Lead | BS0802 : Ball screw diameter 8mm, lead 2mm |
| ⑧ Rated Current | 1.5 : 1.5A |
| ⑨ Wiring | 4 : Bipolar with 4 lead wires / 6 : Unipolar with 6 lead wires |
| ⑩ Lead Screw Length / Stroke | 100 means with 100mm lead screw length for external type and Non-captive type. 100 means with 100mm stroke linear motion of motor ourshaft for captive type and electrical cylinder type. |
| ⑪ Customized Option | A : Anti-Blacklash Nut / B : Brake / T : Teflon Coating for Lead Screw Treatment / P : Manual knob |
| ⑫ Unique Identifier | XXX : Use XXX to identify specific customer order the same size motors. Note : Standard motor doesn't have it. |
Motor size 42mm, 2 phase 1.8°, with a zero position sensor or an origin position switch closed-loop external ball screw linear stepper motor, motor length 34mm, ball screw diameter 8mm, lead 2mm rated current (phase) 1.5A, bipolar, 4 lead wires, screw length 100mm, with brake.
Short Descriptions
| Motor Type | Bipolar stepper |
| Step Angle | 1.8° |
| Voltage (V) | 2.6 / 3.3 / 2 / 2.5 |
| Current (A) | 1.5 / 1.5 / 2.5 /2.5 |
| Resistance (Ohms) | 1.8 / 2.2 / 0.8 / 1 |
| Inductance (mH) | 2.6 / 4.6 / 1.8 / 2.8 |
| Lead Wires | 4 |
| Motor Length (mm) | 34 / 40 / 48 / 60 |
| Ambient Temperature | -20℃ ~ +50℃ |
| Temperature Rise | 80K Max. |
| Dielectric Strength | 1mA Max. @ 500V, 1KHz, 1Sec. |
| Insulation Resistance | 100MΩ Min. @500Vdc |
Electrical Parameters
| Motor size |
Voltage / Phase (V) |
Current / Phase (A) |
Resistance / Phase (Ω) |
Inductance / Phase (mH) |
Number of Lead Wires |
Rotor Intertia (g.cm2) |
Motor Weight (g) |
Motor Length L (mm) |
| 42 | 2.6 | 1.5 | 1.8 | 2.6 | 4 | 35 | 250 | 34 |
| 42 | 3.3 | 1.5 | 2.2 | 4.6 | 4 | 55 | 290 | 40 |
| 42 | 2 | 2.5 | 0.8 | 1.8 | 4 | 70 | 385 | 48 |
| 42 | 2.5 | 2.5 | 1 | 2.8 | 4 | 105 | 450 | 60 |
Dimensions
42E2XX-BSXXXX-X-4-150
standard external motor outline drawing
Lead screw length can be customized
Customized machining is viable at the end of lead screw
Please contact us for more ball screw specifications.
Customized machining is viable at the end of lead screw
Please contact us for more ball screw specifications.
Ball nut 0801 and 0802
outline drawing
Ball nut 1202
outline drawing
Ball nut 1205
outline drawing
Ball nut 1210
outline drawing
Speed and thrust curve
42 series 34mm motor length bipolar Chopper drive
100% current pulse frequency and thrust curve
42 series 40mm motor length bipolar Chopper drive
100% current pulse frequency and thrust curve
42 series 48mm motor length bipolar Chopper drive
100% current pulse frequency and thrust curve
42 series 60mm motor length bipolar Chopper drive
100% current pulse frequency and thrust curve
| Lead (mm) | Linear velocity (mm/s) | |||||||||
| 1 | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 |
| 2 | 2 | 4 | 6 | 8 | 10 | 12 | 14 | 16 | 18 | 20 |
| 5 | 5 | 10 | 15 | 20 | 25 | 30 | 35 | 40 | 45 | 50 |
| 10 | 10 | 20 | 30 | 40 | 50 | 60 | 70 | 80 | 90 | 100 |
Test condition : Chopper drive, no ramping, half micro-stepping, drive voltage 40V
| < 이전글 | 목록보기 | 다음글 > |